0-10 Volt LED Control – Dimmers & Power Supplies 2018-06-08T11:31:40+00:00

0-10V LED Dimming Module

  • 0-10v LED dimmer receiver module
  • Watts:  96W(@12V) – 192W(@24V)
    Voltage: 12V or 24V 

240W LED Power Supply (0-10V)

  • 240-Watt LED Power Supply (0-10V Dimmable)
  • Watts: 192W(@12V) – 240W(@24V)
    Voltage: 12V or 24V

320W LED Power Supply (0-10V)

  • 320-Watt LED Power Supply (0-10V Dimmable)
  • Watts: 264W(@12V) – 320W(@24V)
    Voltage: 12V or 24V

600W LED Power Supply (0-10V)

  • 600-Watt LED Power Supply (0-10V Dimmable)
  • Watts: 480W(@12V) – 600W(@24V)
    Voltage: 12V or 24V

 

0-10 Volt LED Control
– dimmers & drivers from InStyle LED

0-10V is an analogue lighting protocol often used to control LED dimming. It works by adjusting voltage in a range between zero and 10 volts (DC), and using the output to vary the LEDs’ brightness.

InStyle have a range of 0-10 volt LED-dimming products. Each provides single-channel output, ideal for controlling white and single-colour LEDs.

  • For small projects, our 0-10V LED dimmer is the ideal choice. Outputting up to 192 watts (at 24V), this module can control over 15 metres of 5W LED tape. (Note: you’ll need a separate power supply.)
  • For larger projects, we supply LED transformers with built-in 0-10V dimming. These connect directly to your LED tape, with no need for a separate dimming module. Our 0-10V dimmable power supplies are available in three sizes – 240 watts, 320 watts or 600 watts.

0-10V dimming can be used for multichannel (RGB/RGBW) LED control, by treating each channel as a single colour. Due to its complexity, we don’t advise this approach – and recommend 0-10V dimming for single-colour dimming only. For RGB/RGBW applications, we recommend control via multichannel RF LED receivers, DALI receivers, or DMX.

/** * Track AdWords conversions on this page... */