Call Us Today! 0116 2799083 | Next Day Delivery on Orders Before 4pm|Sales@InStyleLED.co.uk
10 Watt RGBW LED Tape2018-08-24T11:44:09+00:00

10 Watt RGBW LED Tape

4-in-1 SMD, 30 LEDs Per Metre
Pure White or Warm White
Commercial Grade

Availability: In Stock for next day delivery

For projects that require full colour-change functionality for feature lights, InStyle’s 10-watt RGBW LED tape is the perfect choice.

With 30 LEDs to every metre of PCB, each housing four coloured LED chips – red, green, blue and white – RGBW LED strip lights will let you mix any shade of the spectrum you can imagine… and also offer the option of a perfect white light from dedicated LEDs. RGBW LEDs mix light-colours at source – so you’ll get smooth consistent colour when the light falls on any surface.

InStyle has two varieties of 10W RGBW LED tape – with different whites, so you can choose exactly the right colour palette for your home or other project.

  • Pure White – white LEDs with a hint of cool blue (approx. 5500 Kelvin)
  • Warm White – white LEDs with a richer, more yellow hue (approx. 3000 Kelvin)

The addition of a dedicated white chip in each LED opens up an unlimited range of pastel colours that three primary colours (RGB) couldn’t create on their own – as well as the ability to mix your preferred shades of white.

Outputting up to 720 lumens per metre of LED tape, our 10W RGBW strip lights produce an ideal level of illumination for highlights and other decorative lighting applications. If you need brighter, stronger lighting (working lights, for example) then we recommend InStyle’s 20W RGBW LED strip lights – which will give you a massive 1330 lumens per metre when all four colours are at full brightness.

Our RGBW LED tape is available on 5m standard reels, with cut-points every 100mm. There’s no minimum order, and InStyle can assist you with your project from start to finish with advice and technical help – we can even supply your LED tape pre-cut and soldered to the lengths you need.

All of Instyle’s products are in stock with a 2 year warranty.

InStyle’s LED tape is ideal for homes, restaurants, clubs, bars, hotels, and signage. And the list doesn’t end there – with the complete control it offers, this RGBW LED Tape can be used anywhere!

Controlling your LED Tape

inStyle LED has the ultimate choice of professional control gear for your LED tape. Choose from:

DMX:

InStyle stocks 4-channel DMX 512 decoders, specifically made to work with our RGBW LED tape. They’ll allow you to use your own DMX controller, or one of our DMX touch wall-panel controllers. With DMX control you can use your own computer software, a night club DMX desk, a touch panel or any other compatible interface. The choices are endless.

RF Multizone controller:

Our multizone controller will let you select any shade of any colour, control separate zones (up to 10) independently, fully dim your LEDs, programme colour scrolls, and much more – all wirelessly! Check it out here…

RF Touch panel:

With the RGBW touch panel controller, you can manage up to 4 zones independently, selecting all shades of any colour. And you can fully dim your LEDs, programme colour scrolls and more. See more details on our product page.

  • Commercial Grade LED Tape
  • High Quality Branded LED Chip
  • Choice of Pure (approx. 5500K) or Warm (approx. 3000) white LEDs
  • Thick 3oz PCB board for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PCB board and to stop short circuiting
  • Smooth linear effect
  • IP65 splashproof & IP67 waterproof available
  • Product Codes:
    RGBW-10 (Pure White) / RGBW-10-65 (Pure White Splashproof)
    RGBWW-10 (Warm White) / RGBWW-10-65 (Warm White Splashproof)
Product10 Watt RGBW LED tape
LED Wattage:9.6 watts per metre
Voltage:12 volts
Colours:Any colour can be created
Pure White or Warm White LEDs
CRI:85+
IP RatingNo coating or
IP65/IP67 heatshrink
LED Chip5050 SMD
LED Life50,000 Hours
No. of LEDs:30 LEDs per Metre
Lumens:720 lm/m (maximum output)
Beam Angle:120 degrees
Cut Points:100mm
Reel Lengths5 Metres
Tape width:10mm
Tape Height3mm

Fully compatible with these LED controllers

RGB Multizone WIFI Controller

Single-Zone RGB Wireless Wall Controller

4-Zone RGB Wireless Controller

Single-zone RGBW remote control

Detachable LED wall control

10 Watt RGBW LED Tape Datasheet PDF

10 Watt RGBW LED Tape Datasheet PDF

FAQs

RGBW stands for Red, Green, Blue and White. These colours are used by the RGBW tape to mix the millions of different colour combinations that can be created using this tape.

LED strips are designed to be very flexible. Their PCBs (printed circuit boards) are so robust that many LED tape products can be bent up to 90 degrees with no difficulty.

Be aware that higher-power LED strips are less flexible than lower-power ones. This is because the LED modules are placed closer together on high-power strips, and require wider PCBs (for more heat dispersal).

For more info and examples, check out our support page.

To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 16m of 9.6w LED tape: 16 x 9.6w = 153.6w Therefore you would require a 200w transformer.

For more information, see our support page on LED power supplies and their output.

For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.

The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’

For more information, see our support page discussing how bright your LED tape needs to be.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the LED tape, this makes it easy to wipe to clean etc.

For more information, see our support page describing the waterproof LED strip light options we offer.

All the LED strips are cuttable. Each can be cut at various points, either 50mm, 100mm, 150mm or 200mm depending on which wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.

If you’ve ordered your LED tapes cut to custom lengths from us, with all the starter-leads and flexible leads for corners that your project requires, then you’ve most likely got everything you need already!

But for some installations, the following accessories may prove useful:

 

This product is inVyci compatible

Premium-brand customers supplied by InStyle LED

cert

You may also be interested in the following product(s)

7.5w RGB LED strip

7.5-Watt RGB LED Tape

Our 7.5w RGB LED tape has 30 branded 5050 tri LEDs per metre. so it’s great for feature lighting in clubs, bars and restaurants, and in the home. Use it to light alcoves, ceilings and more.

15w RGB LED strip

15-Watt RGB LED Tape

With twice the output of 7.5w tapes, our 15-watt RGB LED tape is ideal for areas where more brightness is required or where there is a lot of strong ambient lighting. 60 branded 5050 tri-SMDs per metre.

LED light strip

20-Watt RGBW LED Tape

With four colours in each SMD, 20-watt RGBW LED tape mixes light at source for smooth consistent lighting. It will produce up to 1330 lumens per metre when all four colours are at full brightness.

10w white LED lights - 12 volt LED strip lights

10-Watt White LED Tape

With 120 LEDs per metre, each one a branded 3528 SMD, our 10-watt white LED tape draws 9.6 watts to give up to 720 lumens per metre.

10 Watt RGBW LED Tape Customer Reviews

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Average rating:  
 0 reviews