10 Watt White LED Tape
3528 SMD, 120 LEDs Per Metre
Availability: In Stock for next day delivery
InStyle’s white LED strip lights give a smooth effect when used to light any surface. Alternatively, LED strips can be used in conjunction with our aluminium extrusions. Fitted into the extrusions, light from LED strips will be smoothly diffused.
Like all of our strip lighting range, InStyle LED’s 10-watt white LED tape is available in standard 5m reels and can be cut to the nearest 50mm, for all types of projects from home to hotels. If you need something larger or smaller, we can cut and solder your order to whatever length you need.
Twice as bright as 5-watt LED tape – which is usually fine for coving lighting etc – 10-watt LED tape is ideal for providing brilliant feature lighting. We recommend that you consider the 10w option if you prefer bright feature lighting, or if you intend to position the LED tape in a location with strong ambient lighting. LED tape is only 8mm wide and is available to IP67 standards – fully protected against dust and the effects of immersion – so you can use our LED tape in bathrooms, externally, or in other areas where resistance to water is required.
InStyle LED has a range of different shades of white LED strip lights in stock – from warm white, all the way to pure white. We supply all the following kelvin rating whites as standard: 2700k / 3000k / 4000k / 5500k / 6000k / 6500k. We also have other varieties in stock and we can manufacture to your specific requirements on request if necessary.
InStyle LED supplies commercial grade LED Tape using premium components, built to last and always with consistent colour batching. If you wish to dim your LED tape, InStyle can offer the accessories you need, including DMX controllers and receivers, Triac (mains) dimming, 0-10v dimmers, and more.
W-10 or W-10-24 (Pure White) / W-10-65 or W-10-24-65 (Pure White Splashproof)
NW-10-24 (Neutral White) / NW-10-65 or NW-10-24-65 (Neutral White Splashproof)
WW-10-24 (Warm White) / WW-10-65 or WW-10-24-65 (Warm White Splashproof)
|Product||10 Watt White LED tape|
|LED Wattage:||9.6 Watts per metre|
|Voltage:||12 Volts / 24 volts|
|Standard Colours:||Pure White (6000k)|
Neutral White (4000k)
Warm White (3000k)
|IP Rating||No coating or|
|LED Chip||3528 SMD|
|LED Life||70% @ 50,000 Hours|
|No. of LEDs:||120 LEDs per Metre|
|Lumens:||Pure White = 960lm|
Neutral White = 900lm
Warm White = 840lm
|Beam Angle:||120 degrees|
|Cut Points:||25 mm (12V)|
50 mm (24V)
|Reel Lengths||5 Metres|
|Tape width:||8 mm|
|Tape Height||3 mm|
Why not try our white-light comparison tool to see which shade is best for your home, business or other location?
Fully compatible with these LED controllers
When looking to use white LED lighting you may think it would be a very simple choice to choose as there is only one option…white?
Wrong; there are actually different various shades of white to choose from.
The 3 main shade descriptions of whites are:
- Warm White (also known as soft white) – being described as warm white does not mean that it is warm to touch, the warm is actually describing the shade of white the LED lights up. Warm white tends to be a slightly yellow/brown in colour just like your standard halogen light bulbs. Warm white tends to be used to give a warm, homely feel. The technical specification of warm white is anything from 2700k – 3200k (lower being warmer)
- Pure White (also known as daylight white, commercial white, bright white) – this is the closest resemblance to daylight white, it tends not to have any yellow (warm) or blue (cool) tint to it. This is used in commercial applications and also to highlight areas; it is generally brighter than warm white. On the kelvin scale pure white would be anything from 4500k to 6000k (lower being warmer)
- Cool White – this white is used the least out of the 3 as it is generally too ‘cool’ (blue tint) for commercial and general use. However it is the brightest white and can be used to highlight areas. It still looks very white and the blue tint is extremely faint. This is great to create a cool, crisp feel. On the kelvin scale this would be 6500k+
For more information, see our support page explaining all your white LED tape options.
Be aware that higher-power LED strips are less flexible than lower-power ones. This is because the LED modules are placed closer together on high-power strips, and require wider PCBs (for more heat dispersal).
For more info and examples, check out our support page.
To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.
For example 12m of 9.6w LED tape: 12 x 9.6w = 115.2w Therefore you would require a 150w transformer.
For more information, see our support page on LED power supplies and their output.
InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:
- Brighter LEDs
- Vibrant and consistent colours
- Accurate life expectancy
- Sturdy PCBs
- Excellent resistor management
Find out more on our ‘commercial-grade LED’ support page.
The LED tape can be dimmed in various ways.
1 option is with our dimmable transformers: these are available in 12v/24v and in 30w and 100w. These can then be dimmed off a standard Triac wall dimmer (standard in households).
We also have Triac dimmable receivers; these go in-between the transformer and the LED strip. These work with both 12v and 24v version and are ideal for larger projects that use larger transformers such as the 320w.
Another option is with our 0-10v receivers, these can be used for both the 12V and 24v version. They go in-between the transformer and the LED tape and can be linked to such systems as Lutron.
We also have the option to dim via DMX. We have DMX receivers available to work with DMX desks and systems to allow you to fully dim as required. Again these go in-between the Transformers and LED tape and can be linked together to dim all the receivers at once.
For more information, see our support page comparing options for LED dimming.
Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.
The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.
The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’.
For more information, see our support page discussing how bright your LED tape needs to be.
For more information, see our support page describing the waterproof LED strip light options we offer.
But for some installations, the following accessories may prove useful:
You may also be interested in the following product(s)
9.6 Watt White LED Tape Customer Reviews
Submit your review
We purchased 3m of this LED Tape with the deep surface extrusion at the light was bright enough for under cabinet lighting. It also look smooth as the diffuser worked well
Product came next day. Very helpful customer service
Used the product for an exterior sign. The LED tape had a thin heat shrink coating for the IP67 instead of thick rubber, resin type. This made it easy to work with and very easy to cut and solder. Would use again
I purchased 20m of the warm white 10w LED Tape to use in my hall way. I wanted to use this light as my main lighting in the hallway but not too bright. The LED tape was a lot brighter than I thought but the effect still looked great. I put 10m either side of the hall way shinning up onto the ceiling and got an electrician to wire directly to a on/off light switch. The effect look great as I had a carpenter put coving all the way around the ceiling for the LED tape to sit into and the actual LED tape couldn't be seen. This I would highly recommend as if you only want to see the effect and not the dots on the LED Tape.