Wiring Diagrams & Examples
15 Watt Amber LED Strip Lights
5050 SMD, 60 LEDs per metre
Availability: In Stock for next day delivery
InStyle’s very bright amber LED strip lights use 60 premium Epistar 5050 SMDs on each metre of tape to produce brilliant output that’s 3x more powerful than our standard 5w strips. Like its sister products in our 15-watt single-colour LED range, the strips are 12mm in width and very flexible. Our 15W brightamber LED tape is a great choice for general lighting, high-intensity lighting features, or for use in locations with strong ambient lighting – creating an rich effect on any surface.
Our 15w single-colour LED tapes actually pull around 14.4w per metre – enough to offer the output you need for bars, restaurants, hotels, signage, exhibitions etc. We supply our bright amber strip lighting in 5m reels as standard (with cut-points every 100mm for trimming and joining), or our cutting and soldering service can deliver your order pre-cut to the correct lengths for your project, no matter how large or small.
InStyle stocks the following LED tape colours as standard: Red / Green / Blue / Amber / Pink / Orange. We often have other shades in stock, and we can manufacture to meet specific requirements on request.
We supply commercial grade LED tape using premium components, with consistent colour batching, and which can also be supplied with an IP67 rating – ideal for exterior projects, in bathrooms, and any location where resistance to water is required.
If you need to install dimming for your LED tape, we’ll offer a range of options – wireless, DMX, Triac, 0-10v and others.
- Commercial Grade Bright Amber LED Tape
- Available for next day delivery
- Also available in Red, Blue, Green, Pink and Orange (other colours upon request)
- High Quality Branded LED Chip
- Thick 2oz PCB board for maximum heat dispersion
- High grade, long lasting resistors to stop LED chip damage
- Premium white coating for protection of the PSB board and to stop short circuiting
- Smooth linear effect
- IP65 splashproof & IP67 waterproof available
- Product Codes:
A-15 (Amber) / A-15-65 (Amber Splashproof)
|Product||15 Watt Bright Amber LED tape|
|LED Wattage:||14.4 Watts per metre|
(Red, Blue, Green, Pink, Amber also available)
|IP Rating||No coating or|
|LED Chip||5050 SMD|
|LED Life||70% @ 50,000 Hours|
|No. of LEDs:||60 LEDs per Metre|
|Lumens:||270 lumens / metre|
|Beam Angle:||120 degrees|
|Reel Lengths||5 Metres|
A-15 (Green) / A-15-65 (Green Splashproof)
Fully compatible with these LED controllers
To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.
For example 11m of 14.4w LED tape: 11 x 14.4w = 158.4w Therefore you would require a 200w transformer.
For more information, see our support page on LED power supplies and their output.
Be aware that higher-power LED strips are less flexible than lower-power ones. This is because the LED modules are placed closer together on high-power strips, and require wider PCBs (for more heat dispersal).
For more info and examples, check out our support page.
Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.
The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.
The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’
For more information, see our support page discussing how bright your LED tape needs to be.
For more information, see our support page describing the waterproof LED strip light options we offer.
InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:
- Brighter LEDs
- Vibrant and consistent colours
- Accurate life expectancy
- Sturdy PCBs
- Excellent resistor management
Find out more on our ‘commercial-grade LED’ support page.
But for some installations, the following accessories may prove useful:
You may also be interested in the following product(s)
15 Watt Amber LED Tape Customer Reviews
Submit your review