Call Us Today! 0116 2799083 | Next Day Delivery on Orders Before 4pm|Sales@InStyleLED.co.uk
15 Watt Green LED Tape Lights2018-08-24T12:33:03+00:00

15 Watt Green LED Strip Lights

5050 SMD, 60 LEDs per metre
Commercial Grade

Availability: In Stock for next day delivery

For bright green LED lighting (3x more powerful than our standard 5w tapes), InStyle’s range of 15-watt single-colour strip lights is the ideal choice. 12mm wide and extremely flexible, these high-power green LEDs create an intense effect on any surface. With sixty Epistar-branded 5050 SMDs on each metre of tape, our 15W strip lights are perfect for general lighting, high-powered lighting features, or in locations with strong ambient lighting.

Our 15w single-colour LED tapes actually pull around 14.4w per metre – enough to offer the output you need for bars, restaurants, hotels, signage, exhibitions etc. We supply our bright green strip lighting in 5m reels as standard (with cut-points every 100mm for trimming and joining), or our cutting and soldering service can deliver your order pre-cut to the correct lengths for your project, no matter how large or small.


InStyle stocks the following LED tape colours as standard: Red / Green / Blue / Amber / Pink / Orange. We often have other shades in stock, and we can manufacture to meet specific requirements on request.

We supply commercial grade LED tape using premium components, with consistent colour batching, and which can also be supplied with an IP67 rating – ideal for exterior projects, in bathrooms, and any location where resistance to water is required.

If you need to install dimming for your LED tape, we’ll offer a range of options – wireless, DMX, Triac, 0-10v and others.

  • Commercial Grade Bright Green LED Tape
  • Available for next day delivery
  • Also available in Red, Blue, Amber, Pink and Orange (other colours upon request)
  • High Quality Branded LED Chip
  • Thick 2oz PCB board for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PSB board and to stop short circuiting
  • Smooth linear effect
  • IP65 splashproof & IP67 waterproof available
  • Product Codes:
    G-15 (Green) / G-15-65 (Green Splashproof)
Product15 Watt Bright Green LED tape
LED Wattage:14.4 Watts per metre
Voltage:24 Volts
Colours:Green
(Red, Blue, Amber, Pink, Orange also available)
CRI:85+
IP RatingNo coating or
IP65/IP67 heatshrink
LED Chip5050 SMD
LED Life70% @ 50,000 Hours
No. of LEDs:60 LEDs per Metre
Lumens:630 lumens / metre
Beam Angle:120 degrees
Cut Points:100mm
Reel Lengths5 Metres
Tape width:12mm
Tape Height3mm

Product Codes:
G-15 (Green) / G-15-65 (Green Splashproof)

Fully compatible with these LED controllers

1-zone wireless wall dimmer

1-zone wireless desktop dimmer

5-zone remote dimmer

2-zone wireless wall dimmer

4-zone LED wall dimmer

Easy RF LED dimmer package

15 Watt Green LED Tape Datasheet PDF

15 Watt Green LED Tape Datasheet PDF

FAQs

To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 11m of 14.4w LED tape: 11 x 14.4w = 158.4w Therefore you would require a 200w transformer.

For more information, see our support page on LED power supplies and their output.

For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

LED strips are designed to be very flexible. Their PCBs (printed circuit boards) are so robust that many LED tape products can be bent up to 90 degrees with no difficulty.

Be aware that higher-power LED strips are less flexible than lower-power ones. This is because the LED modules are placed closer together on high-power strips, and require wider PCBs (for more heat dispersal).

For more info and examples, check out our support page.

Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.

The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’

For more information, see our support page discussing how bright your LED tape needs to be.

IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the LED tape, this makes it easy to wipe to clean etc.

For more information, see our support page describing the waterproof LED strip light options we offer.

All the LED strips are cuttable. Each can be cut at various points, either 50mm,100mm,150mm or 200mm depending on whitch wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

If you’ve ordered your LED tapes cut to custom lengths from us, with all the starter-leads and flexible leads for corners that your project requires, then you’ve most likely got everything you need already!

But for some installations, the following accessories may prove useful:

 

This product is inVyci compatible

Premium-brand customers supplied by InStyle LED

cert

You may also be interested in the following product(s)

mid-brightness white LED lights

15-Watt White LED Tape

Just 12mm wide and 3mm deep, our 15-watt white LED tape gives an impressive 1080 lumens per metre while drawing just 14.4w.

5w-Colour-small

5-Watt Single-Colour LED Tape

Our 5-watt colour LED tape has 60 branded 3528 SMDs per metre for a smooth effect. It’s ideal for use as feature lighting in bars, restaurants, hotels, covings, domestic settings and more.

LED light strip

10-Watt RGBW LED Tape

Outputting up to 665 lumens per metre of LED tape, these 10-watt RGBW LED strip lights produce an ideal level of illumination for highlights and other decorative lighting applications.

15w RGB LED strip

15-Watt RGB LED Tape

With twice the output of 7.5w tapes, our 15-watt RGB LED tape is ideal for areas where more brightness is required or where there is a lot of strong ambient lighting. 60 branded 5050 tri-SMDs per metre.

15 Watt Green LED Tape Customer Reviews

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

15-watt green LED strip lights by InStyle
Average rating:  
 0 reviews