15 Watt RGB (colour changing) LED Tape 2017-10-04T14:05:42+00:00

15 Watt RGB LED Tape

5050 SMD, 60 LEDs Per Metre
Commercial Grade

Availability: In Stock for next day delivery

InStyle LED’s 15-watt RGB LED tape is a thin, flexible light source – just 12mm wide and 3mm in depth. With 50,000 hours of continuous-use life, every metre of tape has 60 branded 5050 tri SMDs, pulling 14.4w. Each tri SMD comprises red, green and blue diodes. When linked to one of our controllers, they mix to let you select any colour you need (including white), producing a smooth effect when shining on any surface. InStyle’s SMDs are diffused to give better colour mixing and clearer whites.

Offering twice the output of 7.5w tape, our 15 watt colour changing LED tape is ideal for areas where more brightness is required or where there is a lot of strong ambient lighting. This makes 15w strip lights a great choice for clubs, front and back bars, restaurants, hotels, home, exhibitions, signage and much more. And used with our optic extrusions, our 15w RGB LED tape can perform as a wall colour-washer.

You can order your RGB colour-changing LED tape in standard lengths and cut to the nearest 100mm, or we can pre-cut and solder the lengths your project requires here at InStyle – no matter how large or small. We can also provide 15w LED tape certified to IP67 standard (which means it can be used in locations prone to moisture, such as bathrooms) or even externally.

InStyle LED supplies commercial grade LED tape using premium components, built to last and with consistent colour batching.  We can also offer you a variety of options to control your 15 watt colour-changing LED tape – from wireless remote controls to DMX receivers and wall controllers. Please visit our controller page for more details.

  • Commercial Grade LED Tape
  • High Quality Branded LED Chip
  • Thick 2oz PCB board for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PSB board and to stop short circuiting
  • Smooth linear effect
  • IP65 splashproof & IP67 waterproof available
  • Product Codes: RGB-15 / RGB-15-65 (Splashproof)
Product15 Watt RGB LED tape
LED Wattage:14.4 watts per metre
Voltage:24 volts
Colours:Any colour can be created
CRI:85+
IP RatingNo coating or
IP65/IP67 heatshrink
LED Chip5050 SMD
LED Life50,000 Hours
No. of LEDs:60 LEDs per Metre
Lumens:On White = 1080lm
Beam Angle:120 degrees
Cut Points:100mm
Reel Lengths5 Metres
Tape width:12mm
Tape Height3mm

 

Product Codes: RGB-15 / RGB-15-65 (Splashproof)

15 Watt RGB LED Tape Datasheet PDF

Fully compatible with these LED controllers

RGB Multizone WIFI Controller

Single-Zone RGB Wireless Wall Controller

4-Zone RGB Wireless Controller

single-zone RGB remote control

RGB rotary wall controller

Detachable LED wall control

FAQs

Yes you can mix the colours to get a white or warm white colour.

RGB Tape and the controllers are sold separately, if you purchase RGB Tape with a wireless controller we can set them up and make sure they are working together so you can just install the tape.

For more information, see our support page on RGB and RGBW LED controllers.

RGB stands for Red, Green and Blue. These colours are used in the RGB tape which helps create the millions of different colour combinations that can be output using this tape.

InStyle also offers RGBW tape, which has an additional white LED chip – giving you perfect white light, and the option to mix with the other three primary colours creating a range of pastel shades.

To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 3m of 14.4w LED tape: 3 x 14.4w = 43.2w Therefore you would require a 60w transformer.

For more information, see our support page on LED power supplies and their output.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.

The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’

For more information, see our support page discussing how bright your LED tape needs to be.

IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the LED tape, this makes it easy to wipe to clean etc.

For more information, see our support page describing the waterproof LED strip light options we offer.

All the LED strips are cuttable. Each can be cut at various points, either 50mm, 100mm, 150mm or 200mm depending on whitch wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.

If you’ve ordered your LED tapes cut to custom lengths from us, with all the starter-leads and flexible leads for corners that your project requires, then you’ve most likely got everything you need already!

But for some installations, the following accessories may prove useful:

 

This product is inVyci compatible

Premium-brand customers supplied by InStyle LED

cert

You may also be interested in the following product(s)

7.5w RGB LED strip

7.5-Watt RGB LED Tape

Our 7.5w RGB LED tape has 30 branded 5050 tri LEDs per metre. so it’s great for feature lighting in clubs, bars and restaurants, and in the home. Use it to light alcoves, ceilings and more.

LED light strip

10-Watt RGBW LED Tape

Outputting up to 665 lumens per metre of LED tape, these 10-watt RGBW LED strip lights produce an ideal level of illumination for highlights and other decorative lighting applications.

LED light strip

20-Watt RGBW LED Tape

With four colours in each SMD, 20-watt RGBW LED tape mixes light at source for smooth consistent lighting. It will produce up to 1330 lumens per metre when all four colours are at full brightness.

mid-brightness white LED lights

15-Watt White LED Tape

Just 12mm wide and 3mm deep, our 15-watt white LED tape gives an impressive 1080 lumens per metre while drawing just 14.4w.

15 Watt RGB LED Tape Customer Reviews

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Average rating:  
 3 reviews
LED Bar

I purchased 20m of this for my bar. The LED Tape washed down the front of the bar and looked very bright. I did however have the paint the bar white as this helped a lot in picking up the colours properly. As previously when I had the bar brown it didn't mix the colours quite correct

Very good quality

I was purchasing the LED Tape from my local wholesaler for a little bit cheaper than InStyle LED. However they ran out one time so I tried Instyle's LED Tape out and paid a little more for it but once I received It, it was far brighter. I now only by the commercial grade tape from InStyle

Fast delivery, great service A++++

I ordered from John, he was extremely helpful. Next day delivery and the best quality I have used by a long way (brighter, runs cooler)
Thank you