15 Watt White LED Tape 2018-03-23T15:16:27+00:00

15-watt white LED strip lighting

15-watt white LED strip (12V option) with heatshink coating

15-watt white LED strip (24V option)

Fully compatible with these LED controllers

1-zone wireless wall dimmer

1-zone wireless desktop dimmer

5-zone remote dimmer

2-zone wireless wall dimmer

4-zone LED wall dimmer

Easy RF LED dimmer package

Case Studies using our 15-Watt LED Tape

Oasis Head Office LogoSwimming pool lit by LED stripsBar lit by pure white LEDs

Wiring Diagram

White LED Tape Wiring Diagram

15 Watt White LED Tape

5050 SMD, 60 LEDs Per Metre
Commercial Grade

Availability: In Stock for next day delivery

Extremely thin at just 12mm wide and 3mm deep, our 15-watt white LED tape is a flexible LED strip that gives an impressive 1300 lumens per metre while drawing just 14.4w. It comprises 60 branded 5050 SMDs per metre and will provide 50,000 hours of continuous-use life.

Like all of our white LED strip lights, our 15w LED tape will give you a smooth effect when used to light any surface. Alternatively, LED strips can be used in conjunction with our aluminium extrusions. Fitted into the extrusions, light from LED strips will be smoothly diffused.

Like all of our strip lighting range, InStyle LED’s 15-watt white LED tape is available in standard 5m reels, and Instyle LED can pre-cut  and solder your order to the lengths your project requires, however large or small.

Our 15w strip lights are excellent for use as ‘working light’ – ideal for applications such as kitchen cabinet lighting, pubs and bars, replacing fluorescent tubes, signage, hotels and many other purposes. Fully three times as bright as our standard 5-watt LED tape range, 15w white LED tape is great for feature lighting of covings and plinths. InStyle also offers 15w LED tape certified to IP67 standards – fully protected against dust and the effects of immersion – so it can be used in bathrooms, externally, or in other areas where resistance to water is required.

InStyle LED has a range of different shades of white LED strip lights in stock – from warm white, all the way to pure white. We supply all the following kelvin rating whites as standard: 2700k / 3000k / 4000k / 5500k / 6000k / 6500k. We also have other varieties in stock and we can manufacture to your specific requirements on request if necessary.

InStyle LED supplies commercial grade LED Tape using premium components, built to last and always with consistent colour batching.  If you wish to dim your LED tape, InStyle can offer the accessories you need, including DMX controllers and receivers, Triac (mains) dimming, 0-10v dimmers, and more. 

  • Commercial Grade
  • High Quality Branded LED Chip
  • Thick 2oz PCB board for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PSB board and to stop short circuiting
  • Smooth linear effect
  • IP65 splashproof & IP67 waterproof available
  • Product Codes:
    W-15 (Pure White) / W-15-65 (Pure White Splashproof)
    NW-15 (Neutral White) / NW-15-65 (Neutral White Splashproof)
    WW-15 (Warm White) / WW-15-65 (Warm White Splashproof)
Product15 Watt White LED tape
LED Wattage:14.4 Watts per metre
Voltage:24 Volts
Standard Colours:Pure White (6000k)
Neutral White (4000k)
Warm White (3000k)
Kelvin Available:2700k to 6500k
IP RatingIP54 No Coating or
IP67 Heat shrink Coating
LED Chip5050 SMD
LED Life70% @ 50,000 Hours
No. of LEDs:60 LEDs per Metre
Lumen€™s:Pure White = 1300lm
Warm White = 1140lm
Beam Angle:120 degrees
Cut Points:100mm
Reel Lengths5 Metres
Tape width:12mm
Tape Height3mm


Product Codes:
W-15 (Pure White) / W-15-65 (Pure White Splashproof)
NW-15 (Neutral White) / NW-15-65 (Neutral White Splashproof)
WW-15 (Warm White) / WW-15-65 (Warm White Splashproof)

15 Watt white LED tape datasheet PDF

When looking to use white LED lighting you may think it would be a very simple choice to choose as there is only one option…white?
Wrong; there are actually different various shades of white to choose from.

The 3 main shade descriptions of whites are:

  • Warm White (also known as soft white) – being described as warm white does not mean that it is warm to touch, the warm is actually describing the shade of white the LED lights up. Warm white tends to be a slightly yellow/brown in colour just like your standard halogen light bulbs. Warm white tends to be used to give a warm, homely feel. The technical specification of warm white is anything from 2700k – 3200k (lower being warmer)
  • Pure White (also known as daylight white, commercial white, bright white) – this is the closest resemblance to daylight white, it tends not to have any yellow (warm) or blue (cool) tint to it. This is used in commercial applications and also to highlight areas; it is generally brighter than warm white. On the kelvin scale pure white would be anything from 4500k to 6000k (lower being warmer)
  • Cool White – this white is used the least out of the 3 as it is generally too ‘cool’ (blue tint) for commercial and general use. However it is the brightest white and can be used to highlight areas. It still looks very white and the blue tint is extremely faint. This is great to create a cool, crisp feel. On the kelvin scale this would be 6500k+

For more information, see our support page explaining all your white LED tape options.

To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 6m of 14.4w LED tape: 6 x 14.4w = 86.4w Therefore you would require a 100w transformer.

For more information, see our support page on LED power supplies and their output.

Yes it can be dimmed in various ways.

1 option is with our dimmable transformers: these are available in 12v/24v and in 30w and 100w. These can then be dimmed off a standard Triac wall dimmer (standard in households).

We also have Triac dimmable receivers; these go in-between the transformer and the LED strip. These work with both 12v and 24v version and are ideal for larger projects that use larger transformers such as the 320w.

Another option is with our 0-10v receivers, these can be used for both the 12V and 24v version. They go in-between the transformer and the strip and can be linked to such systems as Lutron.

We also have the option to dim via DMX. We have DMX receivers available to work with DMX desks and systems to allow you to fully dim as required. Again these go in-between the Transformers and strip and can be linked together to dim all the receivers at once.

For more information, see our support page comparing options for LED dimming.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

For this range you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

Deciding on which wattage you require is all down to what kind of application you are fitting the strip in.

The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’

For more information, see our support page discussing how bright your LED tape needs to be.

IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the tape, this makes it easy to wipe to clean etc.

For more information, see our support page describing the waterproof LED strip light options we offer.

All the LED strips are cuttable. Each can be cut at various points, either 50mm,100mm,150mm or 200mm depending on whitch wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.


This product is inVyci compatible

Premium-brand customers supplied by InStyle LED


Launch InStyle's LED white light comparison tool

Why not try our white-light comparison tool to see which shade is best for your home, business or other location?

You may also be interested in the following product(s)

5w white LED lights

5-Watt White LED Tape

With 60 LEDs on each metre, each one a branded 3528 SMD, this high-quality 5-watt white LED tape draws 4.8 watts to give up to 360 lumens (per metre).

10w white LED lights - 12 volt LED strip lights

10-Watt White LED Tape

With 120 LEDs per metre, each one a branded 3528 SMD, our 10-watt white LED tape draws 9.6 watts to give up to 720 lumens per metre.

20w white LED lights

20-Watt White LED Tape

Twice as bright as 10-watt LED tape, our 20-watt white LED strips are ideal for use as general or ‘working light’. They draw 19.2w to output up to 1440 lumens (per metre).

24w white LED lights

24-Watt White LED Tape

This powerful 24-watt white LED tape has 120 x 2835 Epistar-branded LEDs, and can output up to 2800 lumens per metre (pure white option).

15 Watt White Customer Reviews

Submit your review

Create your own review

Average rating:  
 5 reviews
Fast Delivery

Fast delivery - came next day. Would use again. LED Tape was printed commercial grade and certainly felt it with a thicker PCB and very bright. Pay slightly more but I guess you get what you pay for

Kitchen lighting

Used the Warm white LED tape under my kitchen cabinet after speaking to a guy called John. He recommended the 15w to be about the equivalent of florescent tubes, now I do not think the LED tape is as bright but it works perfectly as under kitchen cabinet working light. InStyle cut the LED tape to the length I required and I actually installed the LED tape myself as it was really simple.

Brightest we have used

We have used various types of LED tape for our exhibitions and even though a lot of the internet websites have the same specification, there are lots of different variants in quality. This LED tape was slightly more than our previous supplier but the LED tape represented far better value for money as it was nearly as double as bright!

Very bright

Used these in one of my interior designs. Was a lot brighter than I expected and had to dim using the Triac dimmable transformers.


This LED Tape is a lot brighter than others using the 5050 SMD. The PCB is also thicker and wider which will help with getting away the heat.

/** * Track AdWords conversions on this page... */