Call Us Today! 0116 2799083 | Next Day Delivery on Orders Before 4pm|Sales@InStyleLED.co.uk
4-Channel DMX 512 Receiver (high power)2018-09-20T12:42:37+00:00

High power 4-channel DMX 512 receiver

High power 4-channel DMX 512 receiver - open for wiring

 

Wiring Diagram

DMX Receiver Wiring Diagram

DMX LED Control Troubleshooting PDF

4-Channel DMX 512 Receiver
(high power)

4 x 8 amps, multichannel (suitable for RGB/RGBW)
Commercial Grade

Availability: In Stock for next day delivery

This high-power DMX receiver from InStyle LED is a 4-channel DMX 512 decoder that can be linked and used with any standard DMX 512 protocol receivers / controllers.

Our range of high-power DMX receivers have terminals for power input and output. This 4-channel DMX control module draws an input of either 12v or 24v, and will output up to 4 x 8 amps (that’s a maximum output of 8 amps per channel). The receiver is typically used to control RGB/RGBW products such as RGB LED tape, but you can also use it with single-colour LED tape.

The DMX receiver offers RJ45 sockets for the data signal, and can be daisy-chained using Cat 5 cable wired back to a controller. InStyle LED can provide a wiring diagram for a 3-pin XLR-to-RJ45 cable, if your controller or other products use 3-pin XLR. You can link together as many DMX receivers as you need, but bear in mind that you will need a signal-booster to boost the controller signal after 50 DMX receivers.

What is a DMX LED receiver – and why do I need one?

A DMX LED receiver is a controller receiver. With a DMX receiver, there is no limit to the number of receivers you can link together – which means no limit to the lights you can control off one single controller.

Each DMX receiver can be controlled individually or grouped together. This means the LED lights wired to one DMX receiver can do something different to the other DMX receivers around it. This can be extremely effective for DMX control of large projects such as bars, clubs, restaurants and theatres, where a programmer can pre-set lighting programmes through a linked PC desk.

If you’re looking for a simple DMX wall controller, InStyle LED also stocks a controller with a stainless steel wall-plate. This kind of DMX control is ideal for homes, bars, restaurants and much more. The wall controller comes complete with pre-programmed settings and is very simple to use.

  • Commercial Grade DMX LED Receiver
  • Ideal for internal use
  • Product Code: RC-DMX8-4
Product4-Channel DMX Receiver
Decode CHt:1-4
Signal Input:Standard DMX 512 Protocol
Output Signal:0~24V Pulse Width Modulation
Voltage Input:DC, +12~24V
Power Output:384W (12V) = 4x96W /
768W (24V) = 4x192W
Operating Temp:0~70℃
Warranty:2 Years
Product Code:RC-DMX8-4
CE + RoHS Certificated:Yes
Length170 mm
Width:60 mm
Height29 mm

Product Code: RC-DMX8-4

Product to be controlledMax Length of LED Tape
12v, 5 watt White LED Tape 19.2 metres
12v, 7.5 watt RGB LED Tape 38.4 metres
12v, 10 watt White / RGBW LED Tape9.6 metres / 38.4 metres
24v, 12 watt White / Dual-White LED Tape16 metres / 32 metres
24v, 15 watt Single-Colour / RGB LED Tape12.8 metres / 38.4 metres
24v, 20 watt White / RGBW LED Tape9.6 metres / 38.4 metres
24v 24 watt White / Dual-White LED Tape8 metres / 16 metres
Launch InStyle's LED Receiver Output calculator

…Or why not try our LED receiver output calculator to find how much LED tape your receiver can drive?

4-Channel DMX Receiver (8 amp) Datasheet PDF

Premium-brand customers supplied by InStyle LED

cert

You may also be interested in the following product(s)

Receiver for multizone controller

Multichannel Wireless Receiver

With 4 channels, InStyle’s RF multichannel receiver is ideal for use with any of our RGB / RGBW LED controllers or multizone (white or single-colour) dimmers. It’s suitable for 12V or 24V LEDs, and outputs 8 amps (up to 192W) per channel.

0-10v LED dimmer receiver module

0-10V Dimming Receiver

InStyle’s 0-10V LED receiver is a single-channel 10-amp module that offers smooth zero to 100% dimming. The receiver can be wired to either 12V (max. wattage 120 watts) or 24V (max. wattage 240 watts) LED installations.

4-Channel DMX 512 Receiver

4-Channel DMX Receiver

This 4-channel DMX control module is suitable for linking and use with any standard DMX 512 protocol receivers/controllers. It draws an input of either 12v or 24v, and will output up to 4 x 5 amps (that’s a maximum output of 5 amps per channel).

TRIAC LED dimmer module

TRIAC Dimmer Module

This TRIAC dimming module is a single-channel receiver that will can be wired to any standard LED transformer to provide full mains-dimming functionality. It draws an input voltage of 100-240v AC, with an output voltage 12v or 24v.

High-Power DMX 512 Receiver Customer Reviews

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

4-channel DMX receiver (4x8A) for LEDs by InStyle
Average rating:  
 0 reviews