Call Us Today! 0116 2799083 | Next Day Delivery on Orders Before 4pm|
5 Watt Orange LED Tape Lights2018-09-12T11:20:34+00:00

5 Watt Orange LED Tape

3528 SMD, 60 LEDs per metre
Commercial Grade

Availability: In Stock for next day delivery

For warm highlights and feature-lighting, our 5-watt orange LED striplights are a perfect choice, whether you’re installing a business or a residential project. Just 3mm deep and  8mm wide, they can be bent and twisted easily and fitted into places where other feature lights simply can’t be used.

Actually drawing around 4.8w per metre, this LED tape – like all of our 5W single-colour strips – is great for club, restaurant, hotel, signage, bathroom installations and more. We can pre-cut your 4.8w 12v orange LED tape to the lengths your project requires (cut-point spacing = 50mm), or if you prefer to do your own cutting, we’ll supply your order on standard 5-metre reels.

InStyle stocks the following LED tape colours as standard: Red / Green / Blue / Amber / Pink / Orange. We often have other shades in stock, and we can manufacture to meet specific requirements on request.

We supply commercial grade LED tape using premium components, built to last with consistent colour batching (our 5w colour LED tape has a life over 50,000 hours), and is also available with an IP67 rating – which can be used for exterior projects, in bathrooms, and any location where resistance to water is required.

If you need to install dimming for your LED tape, we’ll offer a range of options – wireless, DMX, Triac, 0-10v and others.

  • Commercial Grade Orange LED Tape
  • Available for next day delivery
  • Also available in Red, Green, Blue, Amber and Pink (other colours upon request)
  • High Quality Branded LED Chip
  • Thick 2oz PCB board for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PSB board and to stop short circuiting
  • Smooth linear effect
  • IP65 splashproof & IP67 waterproof available
  • Product Codes:
    O-5 (Orange) / O-5-65 (Orange Splashproof)
Product5 Watt Orange LED tape
LED Wattage:4.8 Watts per metre
Voltage:12 Volts
(Red, Green, Blue, Amber, Pink also available)
IP RatingNo coating or
IP65/IP67 heatshrink
LED Chip3528 SMD
LED Life70% @ 50,000 Hours
No. of LEDs:60 LEDs per Metre
Beam Angle:120 degrees
Cut Points:50mm
Reel Lengths5 Metres
Tape width:8mm
Tape Height3mm

Product Codes:
O-5 (Orange) / O-5-65 (Orange Splashproof)

Fully compatible with these LED controllers

1-zone wireless wall dimmer

1-zone wireless desktop dimmer

5-zone remote dimmer

2-zone wireless wall dimmer

4-zone LED wall dimmer

Easy RF LED dimmer package

5 Watt amber LED Tape Datasheet PDF

5 Watt amber LED Tape Datasheet PDF


To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 7m of 4.8w LED tape: 7 x 4.8w = 33.6w Therefore you would require a 60w transformer.

For more information, see our support page on LED power supplies and their output.

For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

LED strips are designed to be very flexible. Their PCBs (printed circuit boards) are so robust that many LED tape products can be bent up to 90 degrees with no difficulty.

Be aware that higher-power LED strips are less flexible than lower-power ones. This is because the LED modules are placed closer together on high-power strips, and require wider PCBs (for more heat dispersal).

For more info and examples, check out our support page.

Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.

The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’

For more information, see our support page discussing how bright your LED tape needs to be.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the LED tape, this makes it easy to wipe to clean etc.

For more information, see our support page describing the waterproof LED strip light options we offer.

All the LED strips are cuttable. Each can be cut at various points, either 50mm,100mm,150mm or 200mm depending on which wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.

If you’ve ordered your LED tapes cut to custom lengths from us, with all the starter-leads and flexible leads for corners that your project requires, then you’ve most likely got everything you need already!

But for some installations, the following accessories may prove useful:

This product is inVyci compatible

Premium-brand customers supplied by InStyle LED


You may also be interested in the following product(s)

5w white LED lights

5-Watt White LED Tape

With 60 LEDs on each metre, each one a branded 3528 SMD, this high-quality 5-watt white LED tape draws 4.8 watts to give up to 360 lumens (per metre).


15-Watt Single-Colour LED Tape

With 60 branded 5050 SMDs per metre, 15-watt single-colour LED tape is ideal for general lighting, high-powered lighting features and locations with strong ambient lighting.

7.5w RGB LED strip

7.5-Watt RGB LED Tape

Our 7.5-watt RGB LED tape has 30 branded 5050 tri-LEDs per metre. It’s great for feature lighting in clubs, bars and restaurants, and in the home. Use it to light alcoves, ceilings and more.

LED light strip

20-Watt RGBW LED Tape

With four colours in each SMD, 20-watt RGBW LED tape mixes light at source for smooth consistent lighting. It will produce up to 1330 lumens per metre when all four colours are at full brightness.

5 Watt Orange LED Tape Customer Reviews

Submit your review

Create your own review

5-watt orange LED strip lights by InStyle
Average rating:  
 0 reviews