5 Watt White LED Tape 2017-12-06T13:52:07+00:00

5 Watt White LED Tape

3528 SMD, 60 LEDs Per Metre
Commercial Grade

Availability: In Stock for next day delivery

A thin and very flexible LED light source, our 5-watt white LED tape can meet a wide variety of needs. With 60 LEDs per metre, each one a branded 3528 SMD, this high-quality, high lumen-output white LED tape draws 4.8 watts to give up to 480 lumens (per metre), and will last for 50,000 hours of continuous use.

Our white LED strip lights give a smooth effect when used to light any surface. Alternatively, LED strips can be used in conjunction with our aluminium extrusions. Fitted into the extrusions, light from LED strips will be smoothly diffused.

Like all of our strip lighting range, InStyle LED’s 5-watt white LED tape is available in standard 5m reels and can be cut to the nearest 50mm. If you need something larger or smaller, we can cut your order to the length you need.

Our white LED tape is ideal for feature lighting in alcoves and on covings, plinths and signage, in hotels, bars, kitchens and so much more. The LED tape is only 8mm wide and is available to IP67 standards – fully protected against dust and the effects of immersion – so you can use our LED tape in bathrooms, externally, or in other areas where resistance to water is required.

InStyle LED has a range of different shades of white LED strip lights in stock – from warm white, all the way to pure white. We supply all the following kelvin rating whites as standard: 2700k / 3000k / 4000k / 5500k / 6000k / 6500k. We also have other varieties in stock and we can manufacture to your specific requirements on request if necessary.

InStyle LED supplies commercial grade LED tape using premium components, built to last and always with consistent colour batching.  If you wish to dim your LED tape, InStyle can offer the accessories you need, including DMX controllers and receivers, Triac (mains) dimming, 0-10v dimmers, and more.

  • Commercial Grade LED Tape
  • High Quality Branded LED Chip
  • Thick 2oz PCB board for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PSB board and to stop short circuiting
  • Smooth linear effect
  • IP65 splashproof & IP67 waterproof available
  • Product Codes:
    W-5 (Pure White) / W-5-65 (Pure White Splashproof)
    NW-5 (Neutral White) / NW-5-65 (Neutral White Splashproof)
    WW-5 (Warm White) / WW-5-65 (Warm White Splashproof)
  •  

Product5 Watt White LED tape
LED Wattage:4.8 Watts per metre
Voltage:12 Volts
Standard Colours:Pure White (6000k)
Neutral White (4000k)
Warm White (3000k)
CRI:85+
IP RatingNo coating or
IP65/IP67 heatshrink
LED Chip3528 SMD Branded
LED Life70% @ 50,000 Hours
No. of LEDs:60 LEDs per Metre
Lumens:Pure White = 480lm
Neutral White = 450lm
Warm White = 420lm
Beam Angle:120 degrees
Cut Points:50mm
Reel Lengths5 Metres
Tape width:8mm
Tape Height3mm

 

Product Codes:
W-5 (Pure White) / W-5-65 (Pure White Splashproof)
NW-5 (Neutral White) / NW-5-65 (Neutral White Splashproof)
WW-5 (Warm White) / WW-5-65 (Warm White Splashproof)

    Launch InStyle's LED white light comparison tool

    Why not try our white-light comparison tool to see which shade is best for your home, business or other location?

    5 Watt White LED Tape Datasheet PDF

    5 Watt White LED Tape Datasheet PDF

    Fully compatible with these LED controllers

    1-zone wireless wall dimmer

    1-zone wireless desktop dimmer

    5-zone remote dimmer

    2-zone wireless wall dimmer

    4-zone LED wall dimmer

    Easy RF LED dimmer package

    FAQs

    When looking to use white LED lighting you may think it would be a very simple choice to choose as there is only one option…white?
    Wrong; there are actually different various shades of white to choose from.

    The 3 main shade descriptions of whites are:

    • Warm White (also known as soft white) – being described as warm white does not mean that it is warm to touch, the warm is actually describing the shade of white the LED lights up. Warm white tends to be a slightly yellow/brown in colour just like your standard halogen light bulbs. Warm white tends to be used to give a warm, homely feel. The technical specification of warm white is anything from 2700k – 3200k (lower being warmer)
    • Pure White (also known as daylight white, commercial white, bright white) – this is the closest resemblance to daylight white, it tends not to have any yellow (warm) or blue (cool) tint to it. This is used in commercial applications and also to highlight areas; it is generally brighter than warm white. On the kelvin scale pure white would be anything from 4500k to 6000k (lower being warmer)
    • Cool White – this white is used the least out of the 3 as it is generally too ‘cool’ (blue tint) for commercial and general use. However it is the brightest white and can be used to highlight areas. It still looks very white and the blue tint is extremely faint. This is great to create a cool, crisp feel. On the kelvin scale this would be 6500k+

    For more information, see our support page explaining all your white LED tape options.

    LED strips are designed to be very flexible. Their PCBs (printed circuit boards) are so robust that many LED tape products can be bent up to 90 degrees with no difficulty.

    Be aware that higher-power LED strips are less flexible than lower-power ones. This is because the LED modules are placed closer together on high-power strips, and require wider PCBs (for more heat dispersal).

    For more info and examples, check out our support page.

    To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

    For example 7m of 4.8w LED tape: 7 x 4.8w = 33.6w Therefore you would require a 60w transformer.

    For more information, see our support page on LED power supplies and their output.

    InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

    • Brighter LEDs
    • Vibrant and consistent colours
    • Accurate life expectancy
    • Sturdy PCBs
    • Excellent resistor management

    Find out more on our ‘commercial-grade LED’ support page.

    The LED tape can be dimmed in various ways.

    1 option is with our dimmable transformers: these are available in 12v/24v and in 30w and 100w. These can then be dimmed off a standard Triac wall dimmer (standard in households).

    We also have Triac dimmable receivers; these go in-between the transformer and the LED strip. These work with both 12v and 24v version and are ideal for larger projects that use larger transformers such as the 320w.

    Another option is with our 0-10v receivers, these can be used for both the 12V and 24v version. They go in-between the transformer and the LED tape and can be linked to such systems as Lutron.

    We also have the option to dim via DMX. We have DMX receivers available to work with DMX desks and systems to allow you to fully dim as required. Again these go in-between the Transformers and LED tape and can be linked together to dim all the receivers at once.

    For more information, see our support page comparing options for LED dimming.

    For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

    For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

    Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.

    The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

    The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’.

    For more information, see our support page discussing how bright your LED tape needs to be.

    IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the LED tape, this makes it easy to wipe to clean etc.

    For more information, see our support page describing the waterproof LED strip light options we offer.

    All the LED strips are cuttable. Each can be cut at various points, either 50mm,100mm,150mm or 200mm depending on whitch wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

    For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.

    If you’ve ordered your LED tapes cut to custom lengths from us, with all the starter-leads and flexible leads for corners that your project requires, then you’ve most likely got everything you need already!

    But for some installations, the following accessories may prove useful:

     

    This product is inVyci compatible

    Premium-brand customers supplied by InStyle LED

    cert

    You may also be interested in the following product(s)

    10w white LED lights - 12 volt LED strip lights

    10-Watt White LED Tape

    With 120 LEDs per metre, each one a branded 3528 SMD, our 10-watt white LED tape draws 9.6 watts to give up to 720 lumens per metre.

    mid-brightness white LED lights

    12-Watt White LED Tape

    Just 8mm wide and 3mm deep, our 12-watt white LED tape gives an impressive 1440 lumens per metre.

    20w white LED lights

    20-Watt White LED Tape

    Twice as bright as 10-watt LED tape, our 20-watt white LED strips are ideal for use as general or ‘working light’. They draw 19.2w to output up to 1440 lumens (per metre).

    24w white LED lights

    24-Watt White LED Tape

    This powerful 24-watt white LED tape has 120 x 2835 Epistar-branded LEDs, and can output up to 2600 lumens per metre (pure white option).

    5 Watt White LED Tape Customer Reviews

    Submit your review
    1
    2
    3
    4
    5
    Submit
         
    Cancel

    Create your own review

    Average rating:  
     6 reviews
    Great Website

    A Very informative website that helped me make my purchase. Happy all round

    Very bright - very helpful staff

    The LED tape was very bright compared to previous unbranded LED Tape I have purchased off EBay. I spoke on the phone to a very helpful gentleman called John who advised me on what I needed. He arranged the goods to be cut to length as I required. Will be ordering again

    Extremely bright!

    This is the brightest 4.8w LED Tape I have used by far. Good thickness to the PCB aswel

    Kitchen Plinth

    Good service and quick delivery and the lights looked great under my kitchen plinth. The courier APC they use does not give an exact time for delivery so I had to wait in all day which was hassle

    Exactly what I required

    I needed a white output that was as close to 4.7k as possible. As expected it was not available in stock but InStyle LED was able to manufacture the exact shade of white I needed. I was very impressed and so was my customer.

    Quality Product with Amazing Support

    I was impressed with the high quality product but blown away with the product support. I was given the mobile number for the manager of technical support who was still helping me over the phone at 2am. Could not have got this install done on time without this professional support.