3-Channel DMX 512 Receiver
High Powered, Multizone RGB
Availability: In Stock for next day delivery
Our high-power DMX receiver has terminals for power input and output. It uses an input of either 12v or 24v, and will output up to 3 x 5 amps (that’s a maximum output of 5 amps per channel). The receiver is typically used to control RGB products such as RGB LED tape, but you can also use it with single-colour LED tape.
The DMX receiver offers RJ45 sockets for the data signal, and can be daisy-chained using Cat 5 cable wired back to a controller. InStyle LED can provide a wiring diagram for a 3-pin XLR-to-RJ45 cable, if your controller or other products use 3-pin XLR. You can link together as many DMX receivers as you need, but bear in mind that you will need a signal-booster to boost your DMX dimmer / controller signal after 50 DMX receivers.
What is a DMX receiver – and why do I need one?
A DMX receiver is a controller receiver. With a DMX receiver, there is no limit to the number of receivers you can link together – which means no limit to the lights you can control off one single controller.
Each DMX receiver can be controlled individually or grouped together. This means the LED lights on one DMX receiver can do something different to the other DMX receivers around it – this can be extremely effective for large projects such as bars, clubs, restaurants and theatres, where a programmer can pre-set lighting programmes through a linked PC desk.
If you’re looking for a simple DMX wall controller, InStyle LED also stocks a controller with a stainless steel wall-plate. This is ideal for homes, bars, restaurants and much more. The wall controller comes complete with pre-programmed settings and is very simple to use.
- Commercial Grade DMX Receiver
- Ideal for internal use with any DMX dimmer or controller
- Product Code: RC-DMX-3
|Product||3-Channel DMX Receiver|
|Signal Input:||Standard DMX 512 Protocol|
|Output Signal:||0~24V Pulse Width Modulation|
|Ouput (per Channel):||60 watts (12V) /|
120 watts (24V)
|Voltage Input:||DC, +12~24V|
|Power Output:||180W 12V/360W 24V|
|CE + RoHS Certificated:||Yes|
Product Code: RC-DMX-3
|Product to be controlled||Max Length of LED Tape|
|12v, 5 watt White LED Tape||12 metres|
|12v, 7.5 watt RGB LED Tape||24 metres|
|12v, 10 watt White LED Tape||6 metres|
|24v, 12 watt White / Dual-White LED Tape||10 metres / 20 metres|
|24v, 15 watt Single-Colour / RGB LED Tape||8 metres / 24 metres|
|24v, 20 watt White LED Tape||6 metres|
|24v 24 watt White / Dual-White LED Tape||5 metres / 10 metres|
…Or why not try our LED receiver output calculator to find how much LED tape your receiver can drive?
You may also be interested in the following product(s)
Our wireless receiver produces up to 288 watts, and works with either 12v or 24v LED lights to offer reliable and smooth dimming. Use multiple receivers within one zone and set them all to the same channel. Or pair all your receivers to different controllers and they will not interfere with each other.
DMX 512 Receiver Customer Reviews
Submit your review
I have been using the InStyle DMX 512 receivers for many years and they have always been reliable. Always in stock and a good service
I used these in a theatre with a DMX 512 head unit. They all worked well as expected. I had brought some cheap alternatives elsewhere and they had started flashing unexplained and I couldn't get them to work. I will use InStyle again
I used this product to work with the RGB LED tape and our own DMX 512 desk - did exactly what expected