Recessed Angle Extrusion
Designed for LED Tape, Aluminium
Availability: In Stock for next day delivery
If you want to throw an uplight/downlight wash effect from your LED tapes, our recessed angle aluminium extrusion could be the ideal solution. This specialist LED profile lets you mount your LEDs at a shallow angle, directing their light towards a chosen surface. Like our other extrusions, it diffuses the LEDs’ light through a frosted cover, creating a smooth light-bar effect.
If you would prefer more of the light to be directed straight up (rather than at an angle), check out our coving uplight extrusion sister product.
Our recessed internal-angle extrusions are available in standard 1- or 2-metre lengths, and are approximately 21mm wide by 12.5mm in depth.
Advantages of extrusions
Fixing your LED tape into an extrusion can create a more ‘finished’ look when compared to the unhoused PCB – which is ideal if the product is clearly on show. Extrusions can help to prevent contact damage if the LED tape is positioned easily within reach. And even though they are not waterproof, extrusions can help prevent moisture. (To provide more protection against water, consider installing IP67 LED tape in the extrusions.)
Cutting and sizes
Our corner extrusions are available in 1m or 2m lengths as standard. You can simply cut the extrusion the length you require using a hack saw.
Extrusions can be fixed into place using countersink screws, straight into the extrusion.
Why not go to our LED tape extrusions support page to find out more about aluminium LED profiles?
- Commercial Grade
- Ideal for internal use
- Use for wall uplighting & downlighting
- Product Codes: P-RA-1 / P-RA-2
|Product Code:||P-RA-1 / P-RA-2|
|CE + RoHS Certificated:||Yes|
|Length:||1M or 2M|
(21mm incl. flange)
Product Codes: P-RA-1 / P-RA-2