Up-Down Wall Extrusion
Designed for LED Tape, Aluminium
Availability: In Stock for next day delivery
Mounting twin LED strips to throw light in two directions, this specialist aluminium profile is typically used for simultaneous up-down lighting on walls and other vertical features. It can also be installed horizontally, to create reflected wash effects on ceilings and flat surfaces.
Both mounted LED strips are housed behind frosted plastic covers, in order to diffuse their light and eliminate unsightly ‘dotting’.
Up-down wall extrusions are available in standard 1- or 2-metre lengths. The extrusion’s front panel is 49mm deep, and stands about 17mm clear of the surface on which it is installed.
Advantages of extrusions
Fixing your LED tape into an extrusion can create a more ‘finished’ look when compared to the unhoused PCB – which is ideal if the product is clearly on show. Extrusions can help to prevent contact damage if the LED tape is positioned easily within reach. And even though they are not waterproof, extrusions can help prevent moisture. (To provide more protection against water, consider installing IP67 LED tape in the extrusions.)
Cutting and sizes
Our corner extrusions are available in 1m or 2m lengths as standard. You can simply cut the extrusion the length you require using a hack saw.
Extrusions can be fixed into place using countersink screws, straight into the extrusion.
Why not go to our LED tape extrusions support page to find out more about aluminium LED profiles?
- Commercial Grade
- Ideal for internal use
- Twin LED strip mounting – throws lights in two directions
- Product Codes: P-UD-1 / P-UD-2
|Product Code:||P-UD-1 / P-UD-2|
|CE + RoHS Certificated:||Yes|
|Length:||1M or 2M|
|Width:||17.3mm (total projection from wall)|
Product Codes: P-UD-1 / P-UD-2