Call Us Today! 0116 2799083 | Next Day Delivery on Orders Before 4pm|
Ultra Violet LED Tape2018-08-22T09:36:31+00:00

Ultraviolet LED Strip Lights

12 watts / 60 LEDs per metre
Commercial Grade

Availability: In Stock for next day delivery

Drawing around 12 watts per metre, InStyle’s UV LED strip lights are a reliable, high-quality choice for your linear ultra violet (black light) installations.

Black light applications include bar and nightclub illumination, bedrooms, vehicles, game rooms, reprography, and murals/posters.

With 60 LEDs mounted on each metre of printed circuit board (PCB), our UV LED tapes are manufactured using the same Epistar-branded 2835 SMDs as our 12-watt white LED tapes. They also use the same extremely flexible 8mm PCBs, which provide excellent heat dispersal.

Outputting a wavelength in the range 400-410 nm, our UV LED tape is available in waterproof versions only (IP65- or IP67-rated) – which not only protect against moisture but also makes cleaning easier. Tape cut points are every 100mm, and we offer a cutting and soldering service – so we’ll make up your order to the exact lengths your project needs, no matter what size.

InStyle LED supplies commercial grade LED Tape using premium components, built to last, and we offer a variety of ways to dim this LED tape, from wireless to DMX to TRIAC to 0-10v, and more.

  • Commercial Grade LED Tape
  • High Quality Branded UV (black light) LED chips
  • Thick 2oz PCB board for maximum heat dispersion
  • Wavelength 400-410 nm
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PSB board and to stop short circuiting
  • Ideal for replacing UV fluorescent tubes.
  • Choose from IP65 splashproof & IP67 waterproof
  • Product Code: UV-65
ProductUV LED tape
LED Wattage:12 watts per metre
Voltage:24 volts
IP RatingIP65/IP67 (heatshrink coating)
LED Chip2835 SMD
LED Life70% @ 50,000 Hours
No. of LEDs:60 LEDs per Metre
Beam Angle:120 degrees
Cut Points:100 mm
Reel Lengths5 Metres
Tape width:8 mm
Tape Height3 mm


Product Code: UV-65


To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 9m of 12w LED tape: 9 x 12w = 108w Therefore you would require a 150w transformer.

For more information, see our support page on LED power supplies and their output.

For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.

The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

The 12w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’.

For more information, see our support page discussing how bright your LED tape needs to be.

IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the LED tape, this makes it easy to wipe to clean etc.

For more information, see our support page describing the waterproof LED strip light options we offer.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

All the LED strips are cuttable. Each can be cut at various points, either 50mm,100mm,150mm or 200mm depending on whitch wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply three types of clips:

One type is a ‘starter lead clip’, which will connect onto the off-cut and has a cable coming out of it. Or to connect two pieces of LED tape together, you can use either a basic ‘tape to tape clip’, or a ‘flexible-link clip’ which is designed for projects where your LED strips will be installed around corners or other obstructions.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.


This product is inVyci compatible

Premium-brand customers supplied by InStyle LED


You may also be interested in the following product(s)

5w white LED lights

5-Watt White LED Tape

With 60 LEDs on each metre, each one a branded 3528 SMD, this high-quality 5-watt white LED tape draws 4.8 watts to give up to 360 lumens (per metre).

10w white LED lights - 12 volt LED strip lights

10-Watt White LED Tape

With 120 LEDs per metre, each one a branded 3528 SMD, our 10-watt white LED tape draws 9.6 watts to give up to 720 lumens per metre.

20w white LED lights

20-Watt White LED Tape

Twice as bright as 10-watt LED tape, our 20-watt white LED strips are ideal for use as general or ‘working light’. They draw 19.2w to output up to 1440 lumens (per metre).

24w white LED lights

24-Watt White LED Tape

This powerful 24-watt white LED tape has 120 x 2835 Epistar-branded LEDs, and can output up to 2600 lumens per metre (pure white option).

Ultraviolet LED Tape Customer Reviews