Call Us Today! 0116 2799083 | Next Day Delivery on Orders Before 4pm|
Wide Beam-Angle LED Tape – for lightboxes and signage2018-08-22T09:40:04+00:00

Wide-Beam LED Tape (> 200°)

335 & 2835 Epistar-branded SMDs
Beam angle > 200°, white & single-colour options
Commercial Grade

Availability: Made to order, 1 week delivery

Using standard LEDs in combination with side-emitting diodes, InStyle’s wide-beam LED strip lights can spread illumination over a much wider angle than standard LED tapes. Available in a choice of colours (pure white, neutral white, warm white, red, blue, green or amber), our wide-beam LED strips draw 20 watts per metre.

Each standard 2835 SMD mounted on the circuit board is flanked by two side-emitting 335 SMDs. Every metre of LED tape has 60x 2835 SMDs, and 120x 355 SMDs. Total lumen output per metre is 1,920 lm (pure white option).

Each LED is a high-quality Epistar-branded SMD, with a life of 50,000 hours continuous use. Cut-points are spaced at 100mm intervals. Use wide-beam LED strips for your lightbox projects, and for main lighting from a central mounting than requires an extraordinary spread of brightness.

InStyle LED supplies  commercial grade LED Tape using premium components, built to last and always with consistent colour batching.  If you wish to dim your LED tape, InStyle can offer the accessories you need, including DMX controllers and receivers, Triac (mains) dimming, 0-10v dimmers, and more.

  • Commercial Grade LED Tape
  • High Quality Branded LED Chip
  • 335SMDs & 2835SMDs mounted in combination produce a wide-angle beam (over 200°) – high-illumination output
  • Ideal for lightbox projects / main lighting from a central mounting
  • Narrow PCB, 2oz thickness for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for protection of the PSB board and to stop short circuiting
  • Smooth linear effect
  • Product Codes:
    W-20-WB (Pure White), NW-20-WB (Neutral White), WW-20-WB (Warm White)
ProductWide-beam LED tape
LED Wattage:20 Watts per metre
Voltage:24 Volts
Standard Colours:Pure White (6000k),Neutral White (4000k)Warm White (3000k)
IP RatingIP33
LED Chip335 SMDs & 3528 SMDs
LED Life70% @ 50,000 Hours
No. of LEDs:60x 2835 LEDs per metre
120x 335 LEDs per metre
Lumens:1,200 lm (2835 LEDs) + 720 lm (335 LEDs)
= 1,920 lumen/metre total
Beam Angle:at least 200 degrees
Cut Points:100 mm
Reel Lengths5 Metres
Tape width:12 mm
Tape Height3 mm

Product Codes:
W-20-WB (Pure White), NW-20-WB (Neutral White), WW-20-WB (Warm White)

5mm narrow-width LED Tape datasheet PDF

5mm narrow-width LED Tape datasheet PDF


When looking to use white LED lighting you may think it would be a very simple choice to choose as there is only one option…white?
Wrong; there are actually different various shades of white to choose from.

The 3 main shade descriptions of whites are:

  • Warm White (also known as soft white) – being described as warm white does not mean that it is warm to touch, the warm is actually describing the shade of white the LED lights up. Warm white tends to be a slightly yellow/brown in colour just like your standard halogen light bulbs. Warm white tends to be used to give a warm, homely feel. The technical specification of warm white is anything from 2700k – 3200k (lower being warmer)
  • Pure White (also known as daylight white, commercial white, bright white) – this is the closest resemblance to daylight white, it tends not to have any yellow (warm) or blue (cool) tint to it. This is used in commercial applications and also to highlight areas; it is generally brighter than warm white. On the kelvin scale pure white would be anything from 4500k to 6000k (lower being warmer)
  • Cool White – this white is used the least out of the 3 as it is generally too ‘cool’ (blue tint) for commercial and general use. However it is the brightest white and can be used to highlight areas. It still looks very white and the blue tint is extremely faint. This is great to create a cool, crisp feel. On the kelvin scale this would be 6500k+

For more information, see our support page explaining all your white LED tape options.

To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 12m of 9.6w LED tape: 12 x 9.6w = 115.2w Therefore you would require a 150w transformer.

For more information, see our support page on LED power supplies and their output.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

The LED tape can be dimmed in various ways.

One option is with our dimmable transformers: these are available in 12v/24v and in 30w and 100w. These can then be dimmed off a standard Triac wall dimmer (standard in households).

We also have Triac dimmable receivers; these go in-between the transformer and the LED strip. These work with both 12v and 24v version and are ideal for larger projects that use larger transformers such as the 320w.

Another option is with our 0-10v receivers, these can be used for both the 12V and 24v version. They go in-between the transformer and the LED tape and can be linked to such systems as Lutron or HDL.

We also have the option to dim via DMX. We have DMX receivers available to work with DMX desks and systems to allow you to fully dim as required. Again these go in-between the Transformers and LED tape and can be linked together to dim all the receivers at once.

For more information, see our support page comparing options for LED dimming.

For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

All the LED strips are cuttable. Each can be cut at various points, either 50mm,100mm,150mm or 200mm depending on whitch wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.

If you’ve ordered your LED tapes cut to custom lengths from us, with all the starter-leads and flexible leads for corners that your project requires, then you’ve most likely got everything you need already!

But for some installations, the following accessories may prove useful:


This product is inVyci compatible

Premium-brand customers supplied by InStyle LED


You may also be interested in the following product(s)

5w white LED lights

5-Watt White LED Tape

With 60 LEDs on each metre, each one a branded 3528 SMD, this high-quality 5-watt white LED tape draws 4.8 watts to give up to 360 lumens (per metre).

mid-brightness white LED lights

12-Watt White LED Tape

Just 8mm wide and 3mm deep, our 12-watt white LED tape gives an impressive 1440 lumens per metre.

20w white LED lights

20-Watt White LED Tape

Twice as bright as 10-watt LED tape, our 20-watt white LED strips are ideal for use as general or ‘working light’. They draw 19.2w to output up to 1440 lumens (per metre).

24w white LED lights

24-Watt White LED Tape

This powerful 24-watt white LED tape has 120 x 2835 Epistar-branded LEDs, and can output up to 2800 lumens per metre (pure white option).

Wide Beam LED Tape Customer Reviews