Coving Uplight Extrusion
Designed for LED Tape, Aluminium
Availability: In Stock for next day delivery
Housing an LED strip at a right-angles to the surface it’s mounted on, our coving uplight LED profile offers an easy, attractive way to add uplighting on any wall. The aluminium extrusion’s design conceals the LED strip, so you’ll see just light and not diodes. And a frosted plastic covers that clips over the LEDs diffuses the output, eliminating unwanted ‘dotting’.
The right-angle mounting sends the LEDs’ beam straight up. If you would prefer more of the light to be directed onto your wall, check out our recessed-angle extrusion sister product.
The Coving Uplight extrusion is 40mm in height, and stands about 20mm clear of the surface on which it is installed. Note: If required, this profile can be installed the other way up, to provide downlighting rather than uplighting.
Advantages of extrusions
Fixing your LED tape into an extrusion can create a more ‘finished’ look when compared to the unhoused PCB – which is ideal if the product is clearly on show. Extrusions can help to prevent contact damage if the LED tape is positioned easily within reach. And even though they are not waterproof, extrusions can help prevent moisture. (To provide more protection against water, consider installing IP67 LED tape in the extrusions.)
Cutting and sizes
Our coving uplight extrusions are available in 1m or 2m lengths as standard. You can simply cut the extrusion the length you require using a hack saw.
Extrusions can be fixed into place using countersink screws, straight into the extrusion.
Why not go to our LED tape extrusions support page to find out more about aluminium LED profiles?
- Commercial Grade
- Ideal for internal use
- Use for wall uplighting & downlighting
- Product Codes: P-CU-1 / P-CU-2
|Product Code:||P-CU-1 / P-CU-2|
|CE + RoHS Certificated:||Yes|
|Length:||1M or 2M|
|Width:||20mm (total projection from wall)|
Product Codes: P-CU-1 / P-CU-2