20 Watt RGBW LED Tape 2017-12-12T14:13:07+00:00

20 Watt RGBW LED Tape

4-in-1 SMD, 60 LEDs Per Metre
Pure White or Warm White
Commercial Grade

Availability: In Stock for next day delivery

InStyle LED’s 20-watt RGBW LED tape has 60 LEDs per metre, each one housing four LED chips of different colours (RGBW stands for ‘red, green, blue, white’). RGBW LED tape gives you more colour control than ever – letting you select every shade of the spectrum by mixing red, green and blue… while giving you the option of a perfect white light from dedicated white LEDs. And having an additional white chip in each LED also opens up an unlimited range of pastel colours that the three primary colours couldn’t create on their own, as well as the ability to mix your preferred shades of white.

At InStyle, we offer two varieties of RGBW LED tape – with different whites, so you can choose exactly the right colour palette for your home or other project.

  • Pure White – white LEDs with a hint of cool blue (approx. 5500 Kelvin)
  • Warm White – white LEDs with a richer, more yellow hue (approx. 3000 Kelvin)

With a total wattage of 20w per metre, this LED tape will produce a massive 1440 lumens per metre when all four colours are at full brightness. With the four colours mounted in each SMD (as opposed to 2 separate runs), this LED tape mixes light at source – which means you’ll get smooth consistent colour when the light falls on any surface just a short distance away (around 20mm).

Drawing 24 volts, InStyle’s LED tape is 12mm wide and 3mm in depth. We only use commercial-grade components, including branded high-quality Epistar SMDs and thicker 3-ounce printed circuit boards to efficiently disperse heat. This means our LED tapes really do achieve a genuine lifetime of 70% @ 50,000 hours use.

RGBW LED tape is available on 5m standard reels, with cut-points every 100mm. There’s no minimum order, and InStyle can assist you with your project from start to finish with advice and technical help – we’ll even supply your LED tape in easy-to-fit kit form, pre-cut and soldered to the lengths you need.

All of Instyle’s products are in stock with a 2 year warranty.

InStyle’s LED tape is ideal for homes, restaurants, clubs, bars, hotels, and signage. And the list doesn’t end there – with the complete control it offers, this RGBW LED Tape can be used anywhere!

Controlling your LED Tape

inStyle LED has the ultimate choice of professional control gear for your LED tape. Choose from:

DMX:

InStyle stocks 4-channel DMX 512 decoders, specifically made to work with our RGBW LED tape. They’ll allow you to use your own DMX controller, or one of our DMX touch wall-panel controllers. With DMX control you can use your own computer software, a night club DMX desk, a touch panel or any other compatible interface. The choices are endless.

RF Multizone controller:

Our multizone controller will let you select any shade of any colour, control separate zones (up to 10) independently, fully dim your LEDs, programme colour scrolls, and much more – all wirelessly! Check it out here…

RF Touch panel:

With the RGBW touch panel controller, you can manage up to 4 zones independently, selecting all shades of any colour. And you can fully dim your LEDs, programme colour scrolls and more. See more details on our product page.

  • Commercial Grade LED Tape
  • High Quality Branded LED Chip
  • Choice of Pure (approx. 5500K) or Warm (approx. 3000) white LEDs
  • Thick 3oz PCB board for maximum heat dispersion
  • High grade, long lasting resistors to stop LED chip damage
  • Premium white coating for  protection of the PCB board and to stop short circuiting
  • Smooth linear effect
  • IP65 splashproof & IP67 waterproof available
  • Product Codes:
    RGBW-20 (Pure White) / RGBW-20-65 (Pure White Splashproof)
    RGBWW-20 (Warm White) / RGBWW-20-65 (Warm White Splashproof)
Product20 Watt RGBW LED tape
LED Wattage:19.2 watts per metre
Voltage:24 volts
Colours:Any colour can be created
Pure White or Warm White LEDs
CRI:85+
IP RatingNo coating or
IP65/IP67 heatshrink
LED Chip5050 SMD
LED Life50,000 Hours
No. of LEDs:60 LEDs per Metre
Lumens:1440 lm/m (maximum output)
Beam Angle:120 degrees
Cut Points:100mm
Reel Lengths5 Metres
Tape width:12mm
Tape Height3mm

Product Codes:
RGBW-20 (Pure White) / RGBW-20-65 (Pure White Splashproof)
RGBWW-20 (Warm White) / RGBWW-20-65 (Warm White Splashproof)

15 Watt RGB LED Tape Datasheet PDF

20 Watt RGBW LED Tape Datasheet PDF

Fully compatible with these LED controllers

RGB Multizone WIFI Controller

Single-Zone RGB Wireless Wall Controller

4-Zone RGB Wireless Controller

Single-zone RGBW remote control

Detachable LED wall control

FAQs

RGBW stands for Red, Green, Blue and White. These colours are used by the RGBW tape to mix the millions of different colour combinations that can be created using this tape.

LED strips are designed to be very flexible. Their PCBs (printed circuit boards) are so robust that many LED tape products can be bent up to 90 degrees with no difficulty.

Be aware that higher-power LED strips are less flexible than lower-power ones. This is because the LED modules are placed closer together on high-power strips, and require wider PCBs (for more heat dispersal).

For more info and examples, check out our support page.

To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.

For example 8m of 19.2w LED tape: 8 x 19.2w = 153.6w Therefore you would require a 200w transformer.

For more information, see our support page on LED power supplies and their output.

For this type of LED tape you will require just a transformer to get this working. You connect the 2 core starter lead coming out of one end. This is then wired to the transformer, red wire goes to + and the black wire is wired to -. The 2 core cable can be extended as required for you to mount the transformer as far away as required.

For more information, choose one of these links for support and advice on how to install either simple or larger LED tape projects.

Deciding on which wattage you require is all down to what kind of application you are fitting the LED tape in.

The 5w and 10w is ideal to be used as feature lighting. Lighting to highlight areas, as a secondary lighting. Ideal for covings, drop down ceilings signage etc. to give a smooth halo effect. The 10w would be preferred to the 5w for these applications if there is a high amount of ambient lighting.

The 15w and 20w is ideal to be used as general lighting or as feature lighting for areas larger than covings etc. For example washing down front bars / back bars / under kitchen cabinet lighting as ‘working light’

For more information, see our support page discussing how bright your LED tape needs to be.

InStyle LED manufacture and supply commercial-grade LED strip lights – which means our products are high quality and built to last, using only premium components and branded LEDs:

  • Brighter LEDs
  • Vibrant and consistent colours
  • Accurate life expectancy
  • Sturdy PCBs
  • Excellent resistor management

Find out more on our ‘commercial-grade LED’ support page.

IP67 Heat-shrink type is required in areas where you will need resistance to water. For example bathrooms, kitchens and exterior. The heatshrink version is waterproof but it cannot be submersed, for example in a pond. The IP67 Heat-shrink is a protective coating over the LED tape, this makes it easy to wipe to clean etc.

For more information, see our support page describing the waterproof LED strip light options we offer.

All the LED strips are cuttable. Each can be cut at various points, either 50mm,100mm,150mm or 200mm depending on whitch wattage version you have. We can either cut the lengths to your specific lengths as required or you can do this yourself. Once cut to length to join this to a transformer or another piece you will need to be capable of soldering, or if not we also supply 2 types of clips. One type is a starter lead clip, which is s clip that joins onto the off cut and has a cable coming out of it. The other clip is a ‘tape to tape clip’, this clip joins 2 pieces together.

For more information, see these links offering advice and support on cutting and soldering your LED tape, or using clip-on connectors to extend your tape’s length.

If you’ve ordered your LED tapes cut to custom lengths from us, with all the starter-leads and flexible leads for corners that your project requires, then you’ve most likely got everything you need already!

But for some installations, the following accessories may prove useful:

 

This product is inVyci compatible

Premium-brand customers supplied by InStyle LED

cert

You may also be interested in the following product(s)

7.5w RGB LED strip

7.5-Watt RGB LED Tape

Our 7.5w RGB LED tape has 30 branded 5050 tri LEDs per metre. so it’s great for feature lighting in clubs, bars and restaurants, and in the home. Use it to light alcoves, ceilings and more.

LED light strip

10-Watt RGBW LED Tape

Outputting up to 665 lumens per metre of LED tape, these 10-watt RGBW LED strip lights produce an ideal level of illumination for highlights and other decorative lighting applications.

15w RGB LED strip

15-Watt RGB LED Tape

With twice the output of 7.5w tapes, our 15-watt RGB LED tape is ideal for areas where more brightness is required or where there is a lot of strong ambient lighting. 60 branded 5050 tri-SMDs per metre.

20w white LED lights

20-Watt White LED Tape

Twice as bright as 10-watt LED tape, our 20-watt white LED strips are ideal for use as general or ‘working light’. They draw 19.2w to output up to 1440 lumens (per metre).

20 Watt RGB LED Tape Customer Reviews

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Average rating:  
 1 reviews
Very impressive

I have used this LED Tape in several rooms around my home. I went for the RGBWW(warm) 20w type as advised by John and have to say I couldn't be happier. The goods arrived next day, John spoke to my electrician and answered any questions he had, and finally the lights are exceptional. Bright enough to use as general lighting with also the option to add a hint of colour when required. I couldn't recommend this any more highly.